How to calculate filament cost per 3D print
Use the total filament weight and printer time for the batch of accepted parts. Include supports and any other material that the slicer counted for that batch. Divide spool price by the net weight of filament on the spool, then multiply by grams used.
Filament cost = total grams used ÷ spool net weight in grams × spool price.
A 200 g batch from a USD 20 spool containing 1,000 g of filament costs USD 4.00 in material. If it produces two accepted parts, material alone is USD 2.00 per part.
How to include electricity, machine time and labor
Multiply average printer watts by hours and divide by 1,000 for kilowatt-hours. Multiply that by your electricity price per kWh. At 100 W for four hours and USD 0.20/kWh, power costs USD 0.08. Use average power over the print, since the printer can draw different power during heat-up and steady operation.
Multiply machine hours by your hourly machine cost excluding electricity. Multiply hands-on labor minutes divided by 60 by your hourly labor rate. Preparation, part removal and finishing are examples of hands-on time. Fixed batch costs apply once.
Prusa’s print pricing guide distinguishes filament, energy, preparation and machine costs. The U.S. Department of Energy’s energy guide explains the watt, kilowatt and kilowatt-hour units used for electricity.
How failed prints change average cost per accepted part
Enter additional grams and hours for failed work that are outside the accepted-batch totals. A failed part that stopped early can use less filament and machine time. The worksheet uses the quantities you enter and divides the whole batch cost by the accepted parts only.
For the two-part example, add 50 g and one hour for rejected work. At 100 W, USD 0.20/kWh, USD 0.50 per machine hour, 30 hands-on minutes at USD 20/hour and USD 1.50 in fixed costs, the batch totals USD 19.10. The average is USD 9.55 per accepted part.
How to calculate a batch price from gross margin
Gross margin is the difference between selling price and entered cost as a fraction of selling price. Divide cost by one minus the target margin as a decimal. With USD 19.10 of entered costs and a 25% target, the price is USD 25.47 after rounding up to the cent.
Batch price = entered cost ÷ (1 − target gross margin).
The price reflects the costs you entered. Include applicable fees or packaging as part of your own estimate. The worksheet does not predict slicer time, tax, payment fees or demand.