Half-Life Calculator

About this calculator

The Half-Life Calculator solves the exponential decay equation N(t) = N₀ × (1/2)^(t / t½). Fill in any three of initial quantity, remaining quantity, elapsed time and half-life, and it finds the fourth. A second mode converts between half-life, mean lifetime and decay constant.

Leave exactly one of the four boxes empty.
Use the same time unit as t.
Fill in exactly one of the three values.
Embed this calculator

Paste this code into a Custom HTML block on your site. The calculator fits the width of the block. Adjust the height in the code if you want more room for results.

Find this widget in the publisher directory

What is half-life?

Half-life is the time it takes for a quantity that decays exponentially to fall to half of its starting value. It is most familiar from radioactive decay, but it also describes how fast a drug leaves the bloodstream, how a charged capacitor discharges and how quickly some pollutants break down. After one half-life, 50% remains. After two, 25%. After three, 12.5%, and so on.

The decay equations

N(t) = N₀ × (1/2)^(t ÷ t½)
N(t) = N₀ × e^(−t ÷ τ) = N₀ × e^(−λt)
t½ = τ × ln 2 = ln 2 ÷ λ

N₀ is the initial amount, N(t) is the amount remaining after time t, t½ is the half-life, τ (tau) is the mean lifetime and λ (lambda) is the decay constant. Use the same time unit for t and t½. The quantity can be mass, number of atoms, activity in becquerels, or any other amount that halves.

Solving for each unknown

UnknownFormula
Remaining quantityN₀ × (1/2)^(t ÷ t½)
Initial quantityNₜ × 2^(t ÷ t½)
Elapsed timet½ × log₂(N₀ ÷ Nₜ)
Half-lifet × ln 2 ÷ ln(N₀ ÷ Nₜ)

Worked example: dating a fossil

Carbon-14 has a half-life of about 5,730 years. A fossil holds 25% of the carbon-14 found in a living sample. Setting N₀ = 100 and Nₜ = 25, the time is 5,730 × log₂(100 ÷ 25) = 5,730 × 2 = 11,460 years. The fossil is two half-lives old. Radiocarbon dating is generally useful out to around 50,000 years, after which too little carbon-14 is left to measure reliably.

Worked example: how much is left?

You start with 80 grams of a substance with a half-life of 3 days. After 9 days three half-lives have passed, so 80 × (1/2)³ = 10 grams remain. After 10 days the exponent is 10 ÷ 3, and the remaining mass is 80 × 0.5^(3.333) = 7.94 grams.

Half-life, mean lifetime and decay constant

The three quantities carry the same information in different forms. The mean lifetime τ is the average time an individual atom survives before decaying. It is longer than the half-life by a factor of 1 ÷ ln 2, about 1.4427. The decay constant λ is the chance of decay per unit time. If the half-life is 25 units, then τ = 25 ÷ ln 2 = 36.0674 and λ = ln 2 ÷ 25 = 0.0277259.

Derivation

The decay rate is proportional to the amount present: dN/dt = −λN. Integrating gives N(t) = N₀e^(−λt). Setting N(t) = N₀/2 and solving gives t½ = ln 2 ÷ λ, and since τ = 1 ÷ λ, t½ = τ ln 2.

Tips and limits

  • Leave exactly one box empty in the first mode. The calculator solves for it.
  • Remaining quantity cannot exceed the initial quantity for a decaying substance, but the formulas still work if it does (the time then comes out negative).
  • Half-life describes large populations of atoms. For a single atom the decay moment is random.

Typical half-lives

SubstanceApproximate half-life
Carbon-145,730 years
Iodine-1318 days
Cesium-13730 years
Uranium-2384.5 billion years
Caffeine in the bodyabout 5 hours

Enter any of these as the half-life to see how much is left after a given time. For instance, after 24 days an iodine-131 sample is down to 1/8 of its original amount because three half-lives have passed.

Half-life in medicine and the environment

Pharmacists use half-life to schedule doses. If a medicine has a half-life of 6 hours, then a day after a dose only one sixteenth of it remains, and steady levels build up after roughly four to five half-lives of regular dosing. Environmental scientists use the same math to estimate how long a pesticide or a radioactive contaminant will linger in soil or water. Knowing the half-life lets you convert a scary-sounding total into a clear timetable.

Frequently asked questions

How do I calculate the remaining amount after a given time?
Divide the elapsed time by the half-life, then multiply the starting amount by one half raised to that number.
What is the difference between half-life and mean lifetime?
Half-life is when half the sample is gone. Mean lifetime is the average survival time of an atom, equal to the half-life divided by ln 2 (about 1.4427 times longer).
Does the time unit matter?
Only that t and the half-life use the same unit. The result comes back in that same unit.
How many half-lives until a substance is essentially gone?
After 7 half-lives less than 1% remains, and after 10 about 0.1% remains.

Formulas and sample results on this page were checked against independent references. Page last reviewed or updated . How we verify calculators. Project led by Shaun Connell.