Parts of a circle
A circle is the set of all points in a plane that are the same distance from a fixed center point. A few terms describe it:
- Radius (R): the distance from the center to any point on the circle.
- Diameter (D): the longest chord, passing through the center. It is exactly twice the radius.
- Circumference (C): the distance around the circle, its perimeter.
- Area (A): the size of the region enclosed by the circle.
- Chord: any straight segment joining two points of the circle. Arc: a piece of the circumference. Sector: a pie-slice region bounded by two radii and an arc.
The constant π
π (pi) is the ratio of any circle's circumference to its diameter. It is the same for every circle, about 3.14159265358979, and it is irrational: its decimal expansion never ends or repeats. Fractions such as 22/7 (3.142857) and 355/113 (3.1415929) are handy approximations, but the calculator uses the full double-precision value.
Circle formulas
| Known | Radius | Diameter | Circumference | Area |
|---|---|---|---|---|
| Radius R | R | 2R | 2πR | πR² |
| Diameter D | D / 2 | D | πD | πD² / 4 |
| Circumference C | C / 2π | C / π | C | C² / 4π |
| Area A | √(A / π) | 2√(A / π) | 2√(πA) | A |
Worked examples
From the radius. A circle with radius 5 has a diameter of 10, a circumference of 2π × 5 ≈ 31.415926535898 and an area of π × 25 ≈ 78.539816339745.
From the area. If a circular patio must cover 100 square feet, the radius is √(100 / π) ≈ 5.6418958354776 ft, the diameter about 11.283791670955 ft and the edging needed around it about 35.44907701811 ft.
From the circumference. A tree trunk with a measured girth of 12.5 inches has a diameter of 12.5 / π ≈ 3.9788735772974 in and a cross-sectional area of about 12.433979929054 square inches.
Units
The calculator is unit-free: use any length unit and the radius, diameter and circumference come out in that unit, while the area is in that unit squared. Doubling the radius doubles the circumference but multiplies the area by four, because area grows with the square of the size.
Practical uses
Circle formulas come up constantly: sizing pipes and ducts, finding how far a wheel travels in one turn (its circumference), estimating pizza sizes (a 16-inch pizza has about 1.78 times the area of a 12-inch one), laying out round tables and garden beds, and measuring tree diameters from girth in forestry.
Arcs, sectors and chords
Once you know the radius you can find measurements of any part of a circle. An arc spanning a central angle θ (in degrees) has length θ / 360 × 2πR, and the matching sector has area θ / 360 × πR². A chord that subtends angle θ has length 2R · sin(θ / 2). For a circle of radius 5, a 90° arc is about 7.854 long, the quarter-circle sector covers about 19.635 square units, and the chord across it is about 7.071.
Circles in the coordinate plane
A circle with center (h, k) and radius R is described by the equation (x − h)² + (y − k)² = R². This is the distance formula in disguise: every point on the circle is exactly R away from the center. Expanding the equation gives the general form x² + y² + Dx + Ey + F = 0, from which you can recover the center (−D/2, −E/2) and the radius √(D²/4 + E²/4 − F).
Why area grows faster than circumference
Circumference is proportional to the radius, but area is proportional to the radius squared. A pipe with twice the diameter has twice the wall length around it but four times the cross-sectional area, so it can carry roughly four times as much flow at the same speed. The same rule explains why a large pizza is often a much better deal than two small ones.