What is scientific notation?
Scientific notation writes a number as a coefficient multiplied by a power of ten: a × 10ⁿ. In normalized form the coefficient a is at least 1 and less than 10, and n is an integer. It makes very large or very small values easy to read and compare. The mass of the Earth, about 5,970,000,000,000,000,000,000,000 kg, becomes 5.97 × 10²⁴ kg, and the width of a human hair, 0.00007 m, becomes 7 × 10⁻⁵ m.
Converting to scientific notation
Move the decimal point until exactly one non-zero digit sits to its left. The number of places you moved it is the exponent. Moving left gives a positive exponent and moving right gives a negative one.
| Number | Scientific | E-notation |
|---|---|---|
| 5 | 5 × 10⁰ | 5E0 |
| 700 | 7 × 10² | 7E2 |
| 1,000,000 | 1 × 10⁶ | 1E6 |
| 0.0004212 | 4.212 × 10⁻⁴ | 4.212E-4 |
| −5,000,000,000 | −5 × 10⁹ | −5E9 |
E-notation
E-notation is the plain-text version used by calculators, spreadsheets and programming languages. The letter E stands for "times ten to the power of", so 4.212E-4 means 4.212 × 10⁻⁴. Either a capital or a lowercase e is fine (4.212e-4). It does not refer to the mathematical constant e.
Engineering notation
Engineering notation is a variant in which the exponent is always a multiple of three, matching metric prefixes such as kilo, mega and milli. The coefficient can therefore be between 1 and 999.999. For example, 1.234 × 10⁸ becomes 123.4 × 10⁶, which reads naturally as 123.4 mega-units.
Adding and subtracting
First rewrite the numbers so they share the same exponent, then add or subtract the coefficients and keep the exponent. For 1.432 × 10² + 800 × 10⁻¹ − 0.001 × 10⁵, convert everything to × 10²: 1.432 + 0.8 − 1 = 1.232, so the answer is 1.232 × 10².
Multiplying
Multiply the coefficients and add the exponents. For (1.432 × 10²) × (800 × 10⁻¹) × (0.001 × 10⁵): 1.432 × 800 × 0.001 = 1.1456 and the exponents add to 2 − 1 + 5 = 6, giving 1.1456 × 10⁶.
Dividing
Divide the coefficients and subtract the exponents. For (1.432 × 10²) ÷ (800 × 10⁻¹) ÷ (0.001 × 10⁵): 1.432 ÷ 800 ÷ 0.001 = 1.79 and the exponents combine to 2 + 1 − 5 = −2, so the result is 1.79 × 10⁻². If the coefficient falls outside 1 to 10, shift the decimal and adjust the exponent: 0.179 × 10⁻² is the same as 1.79 × 10⁻³.
Powers and roots
Raising to a power multiplies the exponent: (a × 10ⁿ)ᵏ = aᵏ × 10ⁿᵏ. A square root halves it, after making the exponent even if necessary. The calculator mode handles these with X^Y, √X and X².
Tips
- You can type numbers in the converter as 2.3e11, 3.5x10^-12 or with commas.
- Precision in the calculator sets how many digits are kept after the decimal point of the result (default 20). Arithmetic is exact; anything beyond that point is cut off, not rounded.
- Very small or large results hide the real-number view because it would be unreadably long.
Worked conversions
To write 93,000,000 (the distance to the Sun in miles) in scientific notation, move the decimal point seven places left to get 9.3 × 10⁷. To go backward from 6.02 × 10²³, move the decimal point 23 places right, which yields 602 followed by 21 zeros. For a negative exponent such as 1.6 × 10⁻¹⁹, move the decimal point 19 places left, giving 0.00000000000000000016. Checking the sign of the exponent against whether the number is large or small catches most mistakes.
When to use each notation
Use scientific notation in textbooks and lab reports, E-notation when typing into spreadsheets, code or calculators, and engineering notation when the number carries a unit that has a metric prefix, such as 4.7 × 10³ ohms written as 4.7 kilo-ohms. Real number format is best for small, everyday-sized values where the full digits are still easy to read. Significant figures carry over unchanged between the formats, so converting never adds or removes precision.