How do you calculate electric charge from current and time?
Multiply current in amperes by elapsed time in seconds. An ampere is a coulomb per second, so 1 A for 1 s transfers 1 C. For example, 250 mA for 2 minutes is 0.25 A × 120 s = 30 C. The BIPM definition of the ampere uses the fixed elementary charge.
Charge Q = current I × elapsed time t.
You can use a steady current or the average signed current over the full interval. Keep the same reference direction for current and charge. If a current varies and you know only its value at one instant, that value alone cannot determine the total charge.
How do you find current or elapsed time?
Divide charge by a positive elapsed time to find average current. Divide charge by a nonzero current to find elapsed time. For example, 30 C at 250 mA takes 120 s. Negative charge and current can describe flow in the opposite direction. Their ratio must still give a nonnegative time. Zero current transfers no net charge and cannot tell you how long a zero-charge interval lasted.
How many coulombs are in one electron charge?
An electron carries −1.602176634 × 10−19 C. A proton carries the positive value. The positive elementary charge e is fixed exactly in the SI. NIST lists the exact constant. Two excess electrons carry −3.204353268 × 10−19 C. Divide a charge in coulombs by e to get the signed elementary-charge equivalent. A measured decimal charge can return a fractional equivalent because the input is an estimate.
Ampere-hours, coulombs and energy
One ampere-hour equals 3,600 coulombs, and one milliampere-hour equals 3.6 coulombs. These are units of charge. Converting to energy requires voltage information. This tool does not estimate charging efficiency, battery runtime or the force between two charges.