Acres per Hour Calculator

About this calculator

Estimate how fast a mower, tractor implement or sprayer covers a field. Use width and speed to plan a job, or enter the area and time from a job you measured.

Use your actual working speed. Count overlap either in width or in field efficiency.

Changing a unit reinterprets the number you entered.

Embed this calculator

Paste this code into a Custom HTML block on your site. The calculator fits the width of the block. Adjust the height in the code if you want more room for results.

Find this widget in the publisher directory

How do you calculate acres per hour?

Multiply working width in feet by ground speed in miles per hour and the field efficiency as a decimal. Divide by 8.25 to get acres per hour. The 8.25 converts 5,280 feet per mile and 43,560 square feet per acre. Use the speed while doing the work and the width that actually performs the operation.

Acres per hour = width (ft) × speed (mph) × field efficiency ÷ 8.25.

A 12-foot implement working at 5 mph and 80% field efficiency covers about 5.82 ac/h. At that rate, a 24-acre job takes about 4.13 hours. The theoretical rate at 100% efficiency is about 7.27 ac/h. Iowa State University Extension's field capacity guide explains the difference between theoretical and effective rates.

How do you calculate hectares per hour?

Multiply working width in meters by speed in kilometers per hour and field efficiency as a decimal, then divide by 10. For a 6 m implement moving at 8 km/h and 80% efficiency, the estimate is 3.84 ha/h.

Hectares per hour = width (m) × speed (km/h) × field efficiency ÷ 10.

How to measure field capacity

Divide the unique area you covered by the in-field elapsed time. For example, 12 acres in 150 minutes is 4.8 ac/h. Include turning, refilling and other ordinary stops for the job. Count a strip once if two passes overlap. If you use that measured rate to estimate another field, make sure the terrain, equipment and working conditions are comparable.

How to estimate time to finish a field

Divide the area to cover by the effective hourly rate in matching units. Enter the target area in either acres or hectares and the calculator handles the conversion. Field efficiency should account for turns, stops and any overlap that the working width has not already accounted for. Road travel, breaks and weather delays belong in a separate schedule estimate.

Frequently asked questions

How many acres per hour does a 60-inch mower cut?
At 5 mph and 80% field efficiency, a 60-inch mower covers about 2.42 acres per hour. Speed, obstacles and overlap change that estimate.
What does 100% field efficiency mean?
It is the theoretical coverage at the stated width and speed, with continuous work and no overlap or in-field delays.
Should I enter the full deck width or subtract overlap?
If your field efficiency already includes overlap, enter the full cutting width. If you enter the net swath after overlap, use an efficiency that covers the remaining in-field delays only.
Can I calculate a measured work rate without knowing implement width?
Yes. Use measured area and time. Enter the unique area you actually covered and the elapsed in-field time.

Formulas and sample results on this page were checked against independent references. Page last reviewed or updated . How we verify calculators. Project led by Shaun Connell.