Flow Rate Calculator

About this calculator

Find liquid flow from a timed measurement or a full pipe. Estimate fill or drain time with steady flow rates.

Enter the amount collected over the measured time.

Changing a unit reinterprets the number you entered.

Embed this calculator

Paste this code into a Custom HTML block on your site. The calculator fits the width of the block. Adjust the height in the code if you want more room for results.

Find this widget in the publisher directory

How to calculate volumetric flow rate

Volumetric flow rate is the volume that moves per unit of time. Divide a collected volume by the elapsed time to find the average flow. If you collect 10 L in 2 minutes, the flow is 5 L/min. To find the delivered volume at a steady rate, multiply the rate by the elapsed time.

Average flow = collected volume ÷ elapsed time. Delivered volume = steady flow × time.

How to calculate flow in a full round pipe

Multiply the cross-sectional area by the mean speed through it. For a full round pipe, use its actual inside diameter. The area is π × (inside diameter ÷ 2)². A 50 mm bore at 2 m/s carries approximately 235.62 L/min. The USGS explanation of area and velocity describes how discharge uses a representative mean velocity across a flowing cross-section.

Nominal pipe size can differ from the bore. A surface or centerline speed may differ from the cross-section mean. This mode uses a supplied speed and full-pipe geometry, so pressure, head, pipe friction and equipment performance are outside its inputs.

How long does a tank take to fill or drain?

Enter the volume that still has to move. For filling, subtract simultaneous outflow from inflow. For draining, subtract simultaneous inflow from outflow. Divide the remaining volume by the net rate toward the target. Enter the opposing rate as zero if there is none.

Transfer time = remaining volume ÷ (rate toward target − opposing rate).

A tank that needs 100 L and gains 5 L/min while losing 500 mL/min has a net gain of 4.5 L/min. It takes about 22.22 minutes if the rates stay constant. Equal rates leave the level unchanged, and a larger opposing rate moves it away from the target. An already-reached target takes zero time.

US gallons and Imperial gallons

A US liquid gallon is 3.785411784 L. An Imperial gallon is 4.54609 L. Choose the gallon definition for each measurement and the result independently. The NIST unit tables list both gallon systems. Values are rounded for display after calculations and comparisons.

Frequently asked questions

What is the difference between volumetric flow and mass flow?
Volumetric flow measures volume per time. Mass flow measures mass per time and needs fluid density when calculated from volumetric flow.
Can I mix liters per minute and gallons per minute?
Yes. Choose a unit separately for every rate. Choose US or Imperial gallons according to the instrument or source.
What if the rates change as the tank fills?
The estimate uses constant rates. If a rate varies substantially, measure over a representative period or model the changing rate with equipment or tank data.
Can pressure alone tell me pipe flow?
Pressure alone cannot determine flow. Use a measured volume and duration or a full round pipe with a known mean speed.

Formulas and sample results on this page were checked against independent references. Page last reviewed or updated . How we verify calculators. Project led by Shaun Connell.