Baker's Percentage Calculator

About this calculator

Calculate baker’s percentages from a weighed recipe or build a dough formula from flour and hydration. Include flour and water from a preferment, then scale the recipe.

Calculator inputs

Editable Analyze example: 500 g overall flour, 70% hydration, 860 g raw dough.

Recipe controls are loading.

Calculate the labeled example or choose Use my recipe.

Source masses accept unsigned decimals with up to six decimal places and 32 characters. Choose explicit roles; names do not infer composition. Weighing steps are always grams, independently of result units.

Recipe size

Targets are raw ingredients, not baked yield or process loss. Inactive targets remain local.

Ordinary ingredients

3 of 20 rows. Pristine blank rows are omitted; a name, zero, changed role/unit, hydration or acknowledgment requires completion.

Ingredient 1

Ingredient 2

Ingredient 3

Flour/water-only preferments

1 of 4 rows. Pristine blank rows are omitted; a name, zero, changed role/unit, hydration or acknowledgment requires completion.

Preferment 1

Embed this calculator

Paste this code into a Custom HTML block on your site. The calculator fits the width of the block. Adjust the height in the code if you want more room for results.

Find this widget in the publisher directory

What the flour denominator means

In an overall-flour formula, all flour is 100%. Every other percentage uses that same flour mass as its denominator. A 500 g flour pool with 350 g declared water has 350 ÷ 500 × 100 = 70% hydration. Ten grams of a non-hydrating addition is 2%. Percentages can add to more than 100% because they describe a recipe relative to flour, rather than shares of total dough.

The King Arthur Baking professional reference explains flour-based percentages and the distinction between overall and final-mix tables. A recipe that declares its added flour as 100% can also be coherent. Identify the denominator before comparing numbers; a different declared convention is not automatically a mistake.

Include starter components without counting them twice

A modeled preferment contains only flour and water at its entered hydration. For whole mass S and hydration h%, flour is 100S ÷ (100 + h), and water is S minus that flour. Thus 100 g at 100% hydration contains 50 g flour and 50 g water. In the physical weighing list you weigh the whole 100 g once. Its components explain the formula; they are not extra physical ingredients to add again.

The editable example has 450 g ordinary flour, 300 g water, 10 g other ingredient and 100 g modeled preferment at 100% hydration. Overall flour is 450 + 50 = 500 g; water is 300 + 50 = 350 g; raw dough is 450 + 300 + 10 + 100 = 860 g. Hydration is 70%. Flour in modeled preferments is 50 ÷ 500 = 10%, while whole modeled preferment mass relative to overall flour is 100 ÷ 500 = 20%. Those two percentages answer different questions.

Using added flour as a separate comparison denominator, the same whole preferment is 100 ÷ 450 × 100, or about 22.22%. It does not become 22.22% prefermented flour. If a preferment supplies every gram of flour, an added-flour comparison has no positive denominator and is unavailable.

Declare what counts as liquid

Choose Flour, Water, Other counted liquid or Other for every ordinary ingredient. Names are labels only: naming an Other row “Milk” does not add it to the liquid numerator. Selecting Other counted liquid deliberately counts its full entered mass, and the result says Counted-liquid hydration even for an explicit zero row. There is no chemical-water composition database. The Water role is also your declaration, not a test of an ingredient.

The King Arthur hydration explanation discusses practical liquid conventions. State which convention you use when comparing formulas. For enriched preferments, enter known flour, water and other component masses separately if you know them. Their fermented origin is then untracked; a zero “Flour in modeled preferments” value does not prove a recipe contains no fermented flour.

Analyze a recipe or build from percentages

Analyze accepts up to 20 ordinary ingredients and four modeled preferments. Separate flour sources contribute to the same overall pool. A positive flour/water-only preferment may supply all flour, with no ordinary ingredient rows. An untouched blank editor is omitted with a notice. A typed name, zero mass, changed role/unit, entered hydration or checked assumption makes a row intentional and requires its remaining fields.

Build starts from overall flour 100%, your hydration and up to eight non-flour, non-hydrating additions. Its optional single preferment uses the percentage of overall flour already in that preferment, not a whole-starter mass percentage. If all flour F is 500 g, hydration is 70%, prefermented flour share is 20% and preferment hydration is 100%, the modeled preferment contains 100 g flour and 100 g water. Weigh 400 g main flour, 250 g main water, 200 g whole preferment and, for a 2% addition, 10 g other ingredient. Total dough is 860 g.

Main water cannot be negative. At 10% overall hydration, 20% prefermented flour and a 100%-hydration preferment, the preferment alone supplies more water than the formula allows. Increase overall hydration, reduce the prefermented-flour share or reduce preferment hydration. The tool identifies those fields instead of clamping water or silently changing the target. Equality permits zero main water; a complete preferment can also leave zero main flour.

Choose an exact raw target

Keep current size is available in Analyze. Other targets are overall flour mass, raw dough mass, or a whole piece count multiplied by raw mass per piece. Scaling multiplies every ordinary ingredient and every whole preferment by one exact factor. Doubling the 860 g example to 1,720 g gives 900 g flour, 600 g water, 20 g other ingredient and 200 g whole preferment. This is a raw ingredient target, with no allowance for baked yield, evaporation or process loss.

Build determines flour from the sum of overall percentages when you target dough or pieces. Analyze and Build retain separate drafts and do not automatically convert one another. Arbitrary Analyze recipes with multiple preferments, flour blends, counted liquids or very high calculated ratios do not fit Build’s smaller input shape. Exact formulas can also have nonterminating decimal masses, so copying a rounded display into a new recipe is not a universal lossless roundtrip.

Exact formula and practical weighing are separate

Choose exact weighing or independent 0.01 g, 0.1 g or 1 g gram steps. Each physical ingredient rounds halfway upward at that step, including each whole preferment once. Rounded preferments are then split again at their unchanged declared hydration. The result recomputes weighing-list flour, liquid, total dough and hydration and reports the signed difference from the exact plan. It does not quietly adjust a salt or water row to force a total.

For 1,000 g raw dough at 70% hydration and a 2% other addition, with no preferment, the exact masses repeat in decimal. At a 0.1 g step, weigh 581.4 g flour, 407 g water and 11.6 g other ingredient. These happen to total 1,000 g, but their hydration is 407 ÷ 581.4 × 100, slightly above 70%. A matching total does not guarantee an unchanged ratio. If a coarse step removes all flour, rounded hydration is unavailable; keep the exact plan and choose a finer step.

Units, local names and sharing

Inputs use grams, kilograms, avoirdupois ounces or pounds, with source decimals up to six places. There are no cups, fluid ounces or guessed densities. A unit switch changes the visible view while preserving the accepted original token and unit. A derived view may have more decimal places than a new source input; it is not reparsed as a source until you deliberately edit its digits.

Any calculation edit clears old results and actions. Copy and print use generic ingredient names unless you explicitly opt into local names. Public sharing requires separate consent and contains only active numeric inputs, roles and assumptions. Names, private row IDs and inactive drafts stay out of public links and images. A large valid recipe may exceed the link budget; its full local copy and print remain available. No account, automatic saving, recipe telemetry or price data is used.

Use the percentage calculator for a single percentage, the ratio calculator for basic proportions, and the weight calculator for a standalone mass conversion. They do not infer the ingredient roles and preferment accounting used here.

Frequently asked questions

Is starter percentage the same as prefermented flour percentage?
No. Whole preferment mass and flour inside that preferment are different masses. The result names both and uses overall flour as the denominator.
Why does rounded hydration differ from my formula?
Each physical ingredient rounds separately at the chosen gram step. The calculator recomputes hydration from that weighing list; it does not force the exact ratio by changing a row.
Does milk automatically count as water?
No. A name does not choose a role. Selecting Other counted liquid counts its full declared mass and labels the convention explicitly; no chemical-water inference is made.
Can I predict fermentation or baked yield with this?
No. This tool performs declared ingredient arithmetic and raw targeting. Fermentation, food safety, recipe suitability and baking losses are outside its model.

Formulas and sample results on this page were checked against independent references. Page last reviewed or updated . How we verify calculators. Project led by Shaun Connell.