Plant Spacing Calculator

About this calculator

Count planting positions in a measured bed or find density for the spacing you choose.

Example: an 8 ft by 4 ft bed with 12 in spacing.

All rows start at the same end margin. Enter within-row and between-row spacing.

Bed measurements

Changing a unit keeps the entered number. Enter the center-to-center spacing you want to use.

Embed this calculator

Paste this code into a Custom HTML block on your site. The calculator fits the width of the block. Adjust the height in the code if you want more room for results.

Find this widget in the publisher directory

How to calculate plant spacing in a rectangular bed

Enter bed length in the direction the rows run and bed width across the rows. Enter center-to-center spacing along and between rows. Subtract the chosen end margin from both ends, and subtract the side margin from both sides.

Aligned positions along a row = floor(usable length ÷ within-row spacing) + 1. Aligned rows = floor(usable width ÷ between-row spacing) + 1.

The first row starts at the side margin. Its first plant starts at the end margin. A center at the far margin is included. If either pair of margins crosses, the count is zero. Margins that meet exactly can still leave one center along that dimension. For an 8 ft × 4 ft bed with 12 in spacing and 6 in margins, the aligned result is 8 plants in each of 4 rows, or 32 positions.

Staggered and equilateral triangular plant spacing

Staggered rows shift the first plant in even rows by half the within-row spacing. Count those rows from their shifted start and keep the same far margin. In the example bed, two odd rows have 8 positions each and two even rows have 7, for 30 positions at the same row pitch.

Equilateral triangular rows use the same half-spacing offset and a derived row pitch of √3 ÷ 2 times the within-row spacing. That places each nearest diagonal neighbor at the same center distance as its neighbor within the row. The count follows the orientation and starting position you enter. A different direction or start can give a different finite count.

How to calculate plant population per acre or hectare

For a repeating pattern, divide the target area by within-row spacing times between-row spacing, in consistent units. This gives density without accounting for edges, paths or gaps. At 12 in by 12 in spacing, a repeating pattern has one position per square foot, or 43,560 per acre.

The University of Georgia Extension planting calculations connect row spacing and plant counts along a row to field population. The NC State Extension planting guide shows how spacing and planting conditions vary by crop and setup. Use the spacing for your plants and layout. This worksheet counts positions at supplied spacing and does not estimate survival, yield or the best spacing for a species.

Frequently asked questions

Do I measure from the centers or edges of plants?
Use center-to-center spacing. The side and end margins are distances from the bed edges to plant centers.
Why does area divided by spacing give a different count?
Repeating density ignores the bed boundaries. The measured-bed mode counts each row and its positions after margins and any alternating offset.
Can I use zero edge margin?
Yes. A zero margin allows a center on the bed edge. Enter a positive margin when you need clearance.
Can I count beds that are not rectangular?
Divide the space into non-overlapping rectangular sections if that approximates your plan. Account for any walkways or overlap separately.

Formulas and sample results on this page were checked against independent references. Page last reviewed or updated . How we verify calculators. Project led by Shaun Connell.