Horsepower Calculator

About this calculator

Use this horsepower calculator two ways. In definition mode, enter a force, the distance it acts over and the time taken to get power in watts, kilowatts and several kinds of horsepower. In converter mode, convert an amount between watts, kilowatts, mechanical, metric, electrical and boiler horsepower and BTU per hour.

Embed this calculator

Paste this code into a Custom HTML block on your site. The calculator fits the width of the block. Adjust the height in the code if you want more room for results.

Find this widget in the publisher directory

What horsepower measures

Power is the rate at which work is done. Work is force applied over a distance, so power equals force times distance divided by time. The SI unit is the watt: one joule of work per second. Horsepower is an older unit, defined by James Watt's successors as the rate at which a horse could do work, and it is still the standard way to describe engines in the US and many other countries.

Power = force × distance ÷ time

Worked example

Lifting a load with a steady force of 100 N through 100 m in 10 s takes 100 × 100 ÷ 10 = 1,000 W, which is 1 kW or about 1.341 mechanical horsepower. Pushing 550 pounds-force through 1 foot every second is, by definition, one mechanical horsepower (550 ft-lbf/s, about 745.7 W).

Kinds of horsepower

TypeDefinitionWatts
Mechanical (imperial)550 ft-lbf per second745.7
Metric (PS, CV, PK)75 kgf-m per second735.499
ElectricalFixed electrical rating746
BoilerEvaporating 34.5 lb of water per hour at 212 °F9,809.5

The mechanical and metric versions differ by about 1.4%, which is why a car quoted at 200 PS in Europe is roughly 197 hp in the US. Check which one a spec sheet uses before comparing engines.

Watts and BTU

One watt is one joule per second. A BTU (British thermal unit) is a unit of heat energy, about 1,055 joules or 0.293 watt-hours, so a heating appliance rated in BTU/h is delivering power at that rate. One mechanical horsepower is about 2,545 BTU/h.

Using the converter

Pick the unit you have and the unit you want. The converter first turns the amount into watts, then divides by the target unit's watt value, so every unit pair is covered. Example: 1 hp = 745.7 W = 0.7457 kW = 1.01387 PS.

Horsepower, torque and performance

Engines are often described by both horsepower and torque. Torque is twisting force; horsepower is torque multiplied by rotational speed (hp = torque in lb-ft × rpm ÷ 5,252). An engine that makes 300 lb-ft at 5,252 rpm is producing exactly 300 hp. Acceleration depends on power relative to weight, so compare power-to-weight ratios rather than raw horsepower when judging performance.

Limits

Horsepower figures quoted at the crankshaft are higher than power delivered to the wheels, because the drivetrain loses roughly 10% to 20%. The definition mode here treats force as constant over the whole distance and time.

Practical conversions to remember

A few handy equivalents save time: 1 kW is 1.341 hp, 100 hp is 74.57 kW, and 1 PS is 0.9863 hp. For electric motors, the label usually lists kW, and a 15 kW motor is about 20 hp. Heating and cooling equipment lists BTU per hour, with 12,000 BTU/h equal to one ton of refrigeration and about 3.52 kW.

Worked conversion

Convert 250 mechanical horsepower to metric. 250 × 745.7 = 186,425 W. Divide by 735.499 and the result is 253.47 PS. Convert it to kilowatts instead by dividing 186,425 by 1,000 for 186.4 kW.

Power in everyday terms

A person can sustain about 0.1 hp (75 W) for hours and briefly produce over 1 hp in a sprint. A small lawn mower engine delivers 5 to 7 hp, a typical family car 150 to 250 hp, and a large commercial jet engine well over 100,000 hp. Seeing the same numbers in watts helps connect mechanical machines with electrical ones, such as when sizing a generator to run a motor: allow for the motor's starting surge, which can be several times its running power.

Choosing the right unit for the job

Automotive and marine engines are described in horsepower in the US and in kilowatts in most of Europe and Asia, but the two numbers should describe the same machine. When comparing spec sheets, convert to the same unit and the same standard, since manufacturers measure power at the crankshaft, at the flywheel or at the wheels, and the difference between them can be 15% or more. Boiler horsepower is mainly of interest for steam equipment and is far larger than mechanical horsepower, so avoid mixing the two.

Frequently asked questions

How many watts is one horsepower?

One mechanical horsepower is about 745.7 watts. Metric horsepower is about 735.5 W and electrical horsepower is 746 W.

How do I convert hp to kW?

Multiply mechanical horsepower by 0.7457 to get kilowatts.

How do I calculate horsepower from force?

Multiply force by distance and divide by time to get watts, then divide by 745.7 for horsepower.

What is boiler horsepower?

A steam industry unit equal to evaporating 34.5 pounds of water per hour from and at 212 °F, about 9,809.5 W.

Formulas and sample results on this page were checked against independent references. Page last reviewed or updated . How we verify calculators. Project led by Shaun Connell.