How many tiles do I need?
To count tiles, divide the area you want to cover by the area of one tile plus its share of the grout line, then add an allowance for cuts and breakage. Tile is sold by the piece or by the box, so round up to whole tiles and whole boxes.
Tiles to buy = tiles × 1.05 to tiles × 1.10, rounded up
Including the gap matters more than you might expect for small tiles. A 1/8 inch joint around a 2 inch mosaic adds about 12 percent to the footprint of each piece, so ignoring it would overstate the count. For large format tiles the effect is under 3 percent.
Worked example
A 20 by 15 ft room is 300 square feet, or 43,200 square inches. Each 12 by 12 inch tile with a 1/4 inch gap covers 12.25 × 12.25 = 150.06 square inches. That gives 43,200 ÷ 150.06 = 287.9 tiles, so 288 tiles cover the floor, or 24 boxes of 12. Adding 5 to 10 percent for cuts and breakage brings the order to 303 to 317 tiles, or 26 to 27 boxes.
Measuring the area
For a rectangular floor, measure the length and width wall to wall and multiply. For an L-shaped room, split it into two rectangles and add their areas, or enter the combined total area. Subtract fixed cabinets, tubs and islands that will not be tiled. For walls, measure the height of the tiled section times its width, then subtract windows and doors. Measure in the units printed on the tile box if possible, so you can compare your result with the box coverage directly.
Use the form above when you know the tile dimensions, planned grout gap and pieces per box. If your box gives coverage in square feet or square meters, enter that coverage, the area to tile and your allowance in the Flooring Calculator to estimate whole cartons.
Gap size
The gap is the width of the grout joint between tiles. Common choices are 1/16 inch for rectified porcelain and glass, 1/8 inch for most floor and wall tile, and 3/16 to 1/2 inch for handmade or rustic tile with irregular edges. Wider joints hide small size variations between tiles but leave more grout to clean. Enter a negative gap for materials that overlap, such as some roof or wall shingles.
How much extra tile to buy
| Layout | Typical waste allowance |
|---|---|
| Straight grid, simple rectangular room | 5 to 10% |
| Running bond or brick pattern | 10% |
| Diagonal or herringbone | 15 to 20% |
| Many corners, pipes or small cuts | 15% or more |
Keep a few spare tiles after the job. Dye lots and styles change, and matching a cracked tile years later is much easier when you have originals from the same batch.
Pricing tile
Tile is priced per piece, per box or per square foot, and the calculator handles all three. Box pricing is common for standard floor tile, while specialty pieces such as bullnose trim and decorative inserts are usually sold individually. When comparing prices across sizes, convert everything to cost per square foot. Remember to budget separately for thinset mortar, grout, spacers, backer board and sealer, which can add a meaningful share to the material total.
Tile installation options
Size
Large tiles mean fewer grout lines and a more open look, but they need a very flat substrate and are harder to cut around fixtures. Small tiles and mosaics follow curves and slopes, which is why they are popular for shower floors where the floor slopes toward a drain.
Material
- Ceramic: affordable, easy to cut, best for walls and light-traffic floors.
- Porcelain: denser and less absorbent, suited to floors, wet areas and some outdoor use.
- Natural stone: marble, slate, granite and travertine, each unique, usually needing sealing.
- Glass: reflective and easy to clean, common for backsplashes and accents.
Layout pattern
A straight grid is the fastest to install and wastes the least tile. Running bond offsets each row, often by a third of the tile length for plank-style tile. Diagonal, herringbone and basket-weave patterns add visual interest but need more cuts, more time and a larger waste allowance.