How tire size is calculated
A tire code like 265/70R17 packs three measurements into one label. The first number is the tread width in millimeters. The second is the aspect ratio: the height of the sidewall as a percentage of that width. The letter R marks radial construction, and the last number is the wheel (rim) diameter in inches.
Overall diameter = wheel diameter + 2 × sidewall height
Circumference = π × overall diameter
Worked example: 265/70R17
The sidewall is 70% of 265 mm, or 185.5 mm (7.3 in). The 17 in wheel is 431.8 mm, so the overall diameter is 431.8 + 2 × 185.5 = 802.8 mm, or 31.6 in. The circumference is 802.8 × π = 2,522 mm (99.3 in), which gives 638.1 revolutions per mile.
Reading the rest of the sidewall
- Load index. A number such as 95 tells you the maximum load per tire. 95 means 1,521 lb (690 kg).
- Speed rating. A letter such as H (130 mph) or V (149 mph) shows the sustained speed the tire is designed for.
- DOT date code. The last four digits give the week and year of manufacture, so 1326 would be week 13 of 2026.
Comparing two sizes
When you change tires, the overall diameter determines how far the car travels per wheel revolution. Moving from 225/45R17 to 235/40R18 changes the diameter by about 1.7%. Anything within about 3% of stock is usually considered acceptable for the speedometer, gearing and stability systems; beyond that, the differences become noticeable.
Effect on the speedometer
The speedometer counts wheel rotations. A taller tire turns fewer times at the same road speed, so the display reads lower than your actual speed. A shorter tire does the opposite. If tire 2 is 2% taller, a displayed 60 mph is actually about 61.2 mph. The comparison table shows this for a range of speeds.
What to consider when changing wheel or tire size
- Clearance. Wider or taller tires can rub on fenders, suspension parts or the wheel well liner when turning or going over bumps.
- Ride and handling. Lower profile tires have stiffer sidewalls for sharper steering but a harsher ride and less protection from potholes.
- Gearing and fuel economy. A larger diameter effectively raises the final drive ratio, which can reduce acceleration and change mileage.
- Safety systems. Stability control, ABS and some transmissions assume the stock rolling circumference.
- Load rating. Replacement tires must carry at least the load the manufacturer specifies.
Keeping the diameter when going to a bigger wheel
This is often called plus sizing. If you move from a 17 in to an 18 in wheel, the sidewall must shrink so the overall diameter stays the same. The calculator lists standard sizes on the new wheel (widths within 80 mm of the current tire, aspect ratios 35 to 70) whose overall diameter stays within 3% of the original. For 265/70R17 on an 18 in wheel, the exact aspect ratio needed at the same width is about 65.2%, so 265/65R18 is a close match, within 0.5% of the original diameter.
Quick reference
| Common size | Diameter (in) | Revs per mile |
|---|---|---|
| 205/55R16 | 24.9 | 811 |
| 225/45R17 | 25.0 | 808 |
| 245/75R16 | 30.5 | 662 |
| 265/70R17 | 31.6 | 638 |
Correcting the speedometer
If the new tire is larger, multiply the displayed speed by the ratio of new to old diameter to get your true speed. A truck that reads 65 mph with tires 3% taller is actually traveling about 67 mph. Some vehicles allow the speedometer to be recalibrated with a dealer tool or a programmer; otherwise, a GPS speed reading is a quick check.
Choosing the right width
A wider tire has a larger contact patch, which can improve dry grip but raises rolling resistance and may hydroplane sooner in standing water. Check the wheel's approved width range before mounting: each rim width supports a limited range of tire widths.