Pressure Calculator

About this calculator

Find pressure, force or area from two known measurements. For pressures acting on opposite sides, calculate their net normal force and direction.

The form starts with editable example measurements.

Embed this calculator

Paste this code into a Custom HTML block on your site. The calculator fits the width of the block. Adjust the height in the code if you want more room for results.

Find this widget in the publisher directory

How to calculate pressure from force and area

Divide the force acting perpendicular to a surface by the area it acts on. A force of one newton on one square meter produces one pascal. Use the loaded area and the normal component of force.

Pressure = force ÷ area.
Force = pressure × area.
Area = force ÷ pressure.

For example, 100 N over 1 cm² gives 100 ÷ 0.0001 = 1,000,000 Pa, or 1 MPa. Square the length conversion when you convert an area. One centimeter is 0.01 m, so one square centimeter is 0.0001 m².

How to calculate force from pressure and area

Multiply the pressure by the area it acts on. In SI units, Pa × m² gives N. In customary units, psi is pound-force per square inch, so psi × in² gives lbf. For example, 10 psi over 2 in² gives 20 lbf, about 88.9644 N.

How to calculate net force from a pressure difference

Subtract the pressure on face 2 from the pressure on face 1, then multiply by the common loaded area. The face labels fix the sign. A positive result points from face 1 toward face 2. A negative result points the opposite way.

Net normal force = (pressure on face 1 − pressure on face 2) × common loaded area.

With 120 kPa on face 1 and 100 kPa on face 2, the difference is 20 kPa. On 0.01 m², the resulting force is +200 N. Swapping the readings gives −200 N. Using 120 kPa alone would give 1,200 N and omit the opposing contribution.

Both readings must have the same reference. Enter two absolute readings or two readings relative to the same reference. The calculator subtracts them without adding an assumed atmospheric pressure. Equal pressures such as 1 bar and 100 kPa give zero net pressure force.

Use units that match the quantity

QuantityUnit relationship
Pressure1 kPa = 1,000 Pa. 1 bar = 100 kPa. 1 standard atmosphere = 101,325 Pa.
Force1 lbf = 4.4482216152605 N. 1 kgf = 9.80665 N.
Area1 in² = 0.00064516 m². 1 ft² = 0.09290304 m².

What can you infer from zero pressure?

With a positive area, zero pressure produces zero normal pressure force. If both pressure and force are zero, the equation does not determine an area because any positive area satisfies it. A nonzero force and zero pressure cannot give a finite positive area in this model.

This calculator uses a flat loaded area and uniform or area-averaged normal pressure. It does not model friction, gravity, curved surfaces or material strength. For the underlying geometry, use the Area Calculator.

See OpenStax on pressure and normal force, NIST unit conversions and NIST's exact pound-force factor.

Frequently asked questions

How do you calculate pressure?
Divide the perpendicular force by its loaded area. One newton over one square meter is one pascal.
How do you convert psi and square inches to force?
Multiply the pressure in psi by the area in square inches to get pound-force. Multiply by 4.4482216152605 to express the force in newtons.
How do you calculate the force from pressure on two sides?
Subtract face 2 pressure from face 1 pressure and multiply by their common area. Use readings with the same reference.
Can I find area when pressure and force are both zero?
No unique area follows. Any positive area produces zero force under zero uniform pressure.

Formulas and sample results on this page were checked against independent references. Page last reviewed or updated . How we verify calculators. Project led by Shaun Connell.