Material Weight Calculator

About this calculator

Enter the shape, actual dimensions and density of each piece type. See estimated weight per piece and for the full tally.

The starting example uses two plates and an assumed density of 7,850 kg/m³.

Row 1

Optional price and local notes

1 of 50 rows.

Embed this calculator

Paste this code into a Custom HTML block on your site. The calculator fits the width of the block. Adjust the height in the code if you want more room for results.

Find this widget in the publisher directory

How to calculate material weight from dimensions

Calculate the volume of one piece, multiply by the density of its material, then multiply by the number of pieces. Keep units consistent. Volume in cubic meters times density in kilograms per cubic meter gives kilograms. The calculator reports mass, which is often called weight when ordering stock.

Row mass = material volume per piece × material density × number of pieces.

Add a row when a piece type has a different shape, size or density. Each row is calculated independently. The tally adds their masses.

How to calculate steel plate weight

Choose rectangular stock and enter its actual length, width and thickness. For a plate 1 m long, 100 mm wide and 10 mm thick, the volume is 1 × 0.1 × 0.01 = 0.001 m³. At an assumed density of 7,850 kg/m³, one plate is 7.85 kg and two are 15.7 kg. A supplied price of USD 2 per kg gives an estimated USD 31.40 for those two plates.

The example density is an assumption. For your own material, enter the density of the grade and condition you are using.

How to calculate round or rectangular tube weight

For a round tube, enter the outside diameter, length, and either the inside diameter or wall thickness. Twice the wall thickness is the difference between the diameters. The material cross section is the outer circle with the inner circle removed.

Round tube volume = π × (outside diameter − inside diameter) × (outside diameter + inside diameter) × length ÷ 4.

A 1 m tube with a 100 mm outside diameter and an 80 mm inside diameter contains about 0.00282743 m³ of material. At 7,850 kg/m³, it has a mass of about 22.1954 kg. A 10 mm wall gives the same result. Use a short length for a washer or ring.

For a rectangular tube, enter outside width, outside height, wall thickness and length. Subtract the open inner rectangle from the outside rectangle. This uses ideal sharp corners. A manufactured tube may have rounded corners.

Which volume formula does each shape use?

ShapeVolume per piece
Rectangular stockLength × width × thickness
Solid round barπ × diameter² × length ÷ 4
Round tube or ringOuter cylinder volume minus inner cylinder volume
Rectangular tube2 × wall × (outside width + outside height − 2 × wall) × length
Sphereπ × diameter³ ÷ 6
Ellipsoidπ × full axis A × full axis B × full axis C ÷ 6

Enter actual dimensions and your own prices

Use measured dimensions or the product's specified physical dimensions. A nominal pipe or stock size may differ from its actual size. Add a price per kilogram, pound or piece when you have one. A blank price leaves that row outside the priced subtotal. An explicit zero is included as a price. The estimate excludes delivery, taxes and fabrication.

Holes, coatings, moisture, fittings and material tolerances can change actual mass. The total represents material in the modeled shapes. Use measured mass when checking loads or capacities.

See NIST's mass and density guidance and NIST's unit conversions. If you already know a sample's mass and volume, use the Density Calculator.

Frequently asked questions

Should I enter nominal or actual dimensions?
Use actual physical dimensions. A nominal product name may not tell you its exact outside size, wall or thickness.
Can I add steel and aluminum in one tally?
Yes. Add a separate row for each size and material. Each row uses its own entered density.
Why is my material cost shown as a subtotal?
At least one row has a price and at least one is unpriced. The subtotal covers only the priced rows.
What does a shared link include?
It contains the numeric measurements, density, quantity and entered price for each row. Local names and notes are omitted.

Formulas and sample results on this page were checked against independent references. Page last reviewed or updated . How we verify calculators. Project led by Shaun Connell.