Gravel Calculator

About this calculator

The Gravel Calculator works out the volume and weight of gravel or sand for a driveway, path, patio base or drainage bed. Enter a total area, a rectangle or a circle, the depth, and a material density. You get cubic yards, cubic feet and cubic meters, the weight in tons, pounds and kilograms, an optional bag count, and an optional cost priced by volume, weight or bag.

Area to cover
$
Embed this calculator

Paste this code into a Custom HTML block on your site. The calculator fits the width of the block. Adjust the height in the code if you want more room for results.

Find this widget in the publisher directory

From surface area to a gravel order

Area alone does not tell you how much gravel to buy. For a 10 ft by 10 ft area at an illustrative depth of 4 inches, multiply 100 ft² by 4 ÷ 12 ft to get 33.33 ft³, or about 1.23 yd³. Choose the depth for the actual project; this example does not specify a suitable base or drainage design.

Use the square footage calculator to measure the area first. Then enter the layer depth here and use your supplier's density when converting volume to weight. If you are also pouring a slab, calculate that separate layer with the concrete calculator.

How much gravel do I need?

Start with volume: the area to cover multiplied by the depth of the layer. Quarries and landscape yards sell gravel either by volume (cubic yards or cubic meters) or by weight (tons or tonnes), so the second step is to multiply the volume by the density of the material.

Volume (ft³) = area (ft²) × depth (in) ÷ 12
Cubic yards = cubic feet ÷ 27
Weight = volume × density

Worked example

A 10 by 10 ft patio base at 3 inches deep holds 100 × 3 ÷ 12 = 25 cubic feet, which is 0.93 cubic yards or 0.71 cubic meters. Using a typical gravel density of 1,680 kg/m³ (about 105 lb/ft³), the weight is 0.708 × 1,680 = 1,189 kg, or about 2,622 lb, which is 1.31 short tons. At $45 per ton delivered, the material would cost about $59. In 0.5 cubic foot bags, it would take 50 bags.

Typical densities

Materialkg/m³lb/ft³Tons per cubic yard
Gravel, 0.2 to 2 in1,680104.91.42
Gravel with sand1,920119.91.62
Dry sand1,50093.61.26
Wet sand1,900118.61.60

Density varies with stone type, moisture and how tightly the material is packed, so a supplier's own figure is always the best number to use. Select "Use your own density" to enter it.

How deep should gravel be?

For walkways and decorative beds, 2 to 4 inches is a workable baseline. Driveways usually need a compacted base of 4 to 8 inches of larger crushed stone, topped with 2 to 3 inches of finer gravel. Remember that loose gravel settles by roughly 10 percent when compacted, so order a little extra for bases that will be tamped.

Buying gravel: volume or weight?

Bulk suppliers price gravel either per cubic yard or per ton, and the two are not interchangeable without a density. A yard of light pea gravel and a yard of wet sand take up the same space, but the sand can weigh a quarter more. If a quarry quotes by the ton, convert your volume with that quarry's own density figure. If a landscape yard quotes by the yard, check whether the price is for loose or compacted material, because the loose-to-compacted relationship depends on the material and installation. Ask the supplier which quantity their quote covers and what allowance is appropriate for your project.

Before collecting bulk material, compare its actual loaded weight with the payload rating of your vehicle and trailer. Ask the supplier for the load weight and delivery options. A volume such as one cubic yard is not a vehicle-capacity rating.

Preparing the site

Before spreading gravel, strip sod and topsoil from the area, level the subgrade, and lay landscape fabric to keep the stone from sinking into soil and to slow weed growth. Install edging along paths and beds so the gravel stays put. For driveways, compact the base in lifts of 2 to 3 inches with a plate compactor, wetting each layer slightly to help it lock together.

What is gravel used for?

Construction

Gravel is a main ingredient in concrete and asphalt, and a compacted gravel base spreads loads under slabs, pavers, sheds and roads while letting water drain away.

Landscaping and decoration

Pea gravel and river stone make paths, patios, dry creek beds and mulch alternatives that never rot. Light-colored gravel also reflects heat away from planting beds.

Water treatment and agriculture

Graded gravel filters water in wells, septic leach fields and treatment plants, and lines French drains that move groundwater away from foundations.

Types of gravel

  • Bank gravel: natural gravel mixed with sand and clay, dug from riverbanks, used as fill.
  • River stone: smooth, rounded stones tumbled by water, popular for decoration.
  • Pea gravel: small rounded stones about 3/8 inch across, comfortable underfoot for paths and play areas.
  • Crushed stone: angular pieces of quarried rock that lock together when compacted, ideal for driveways and bases.
  • Pay gravel: gravel that contains enough gold or other valuable minerals to be worth mining.

Frequently asked questions

How many tons of gravel are in a cubic yard?
Typical gravel weighs about 1.4 tons per cubic yard (around 2,800 lb). Gravel with sand or wet sand is heavier, about 1.6 tons per cubic yard.
How much area does a ton of gravel cover?
At 105 lb/ft³, one ton is about 19 cubic feet, which covers roughly 76 square feet at 3 inches deep or 114 square feet at 2 inches deep.
How much gravel do I need for a driveway?
Multiply the driveway length by its width and by the depth in feet, then divide by 27 for cubic yards. A 50 by 10 ft driveway with 4 inches of gravel needs about 6.2 cubic yards, roughly 8.8 tons.
How do I convert cubic yards of gravel to tons?
Multiply the cubic yards by the density in tons per cubic yard. For typical gravel use about 1.42, so 5 cubic yards is about 7.1 tons.

Formulas and sample results on this page were checked against independent references. Page last reviewed or updated . How we verify calculators. Project led by Shaun Connell.