Surface Area Calculator

About this calculator

The Surface Area Calculator finds the total outside area of ten common solids: ball (sphere), cone, cube, cylindrical tank, rectangular tank, capsule, spherical cap, conical frustum, ellipsoid and square pyramid. Where it matters, it also splits the total into top, bottom and lateral (side) areas, which is what you need for jobs like painting a tank without its floor or wrapping a cone.

Pick a shape, enter its dimensions and choose a unit for each one. The result comes in that unit squared; if you mix units, it is repeated in each unit you used.

Ball (sphere)
Cone
Cube
Cylindrical tank
Rectangular tank
Capsule
Spherical cap
Enter any two of the three values.
Conical frustum
Ellipsoid
Square pyramid
Embed this calculator

Paste this code into a Custom HTML block on your site. The calculator fits the width of the block. Adjust the height in the code if you want more room for results.

Find this widget in the publisher directory

What is surface area?

Surface area is the total area of all the faces or curved surfaces that enclose a solid, measured in square units. It answers questions like how much paint covers a tank, how much sheet metal makes a duct, or how much wrapping paper a box needs. For many shapes it helps to separate the base area (the flat ends) from the lateral area (the sides), since real jobs often leave one of them out.

Worked example

Example: A cube-shaped box has edges of 5 feet. Choose Cube and enter 5 feet for the edge length. The calculator returns a surface area of 150 ft², which is six square faces of 25 ft² each.

Surface area formulas

Sphere

SA = 4πr²

A sphere's surface is exactly four times the area of its largest cross-section. A ball with a 0.325 in radius has about 1.327 square inches of surface.

Cone

Base = πr²,   Lateral = πr√(r² + h²),   Total = πr(r + √(r² + h²))

The term √(r² + h²) is the slant height. With r = 0.4 ft and h = 0.5 ft, the slant height is about 0.6403 ft, the lateral area about 0.805 ft² and the total about 1.307 ft².

Cube and rectangular tank

Cube: SA = 6a²    Tank: SA = 2(lw + lh + wh)

A 4 in cube has 96 in² of surface. A 3 × 4 × 5 ft box has 2(12 + 15 + 20) = 94 ft².

Cylindrical tank

Bases = 2πr²,   Lateral = 2πrh,   Total = 2πr(r + h)

A tank with a 3.5 ft radius and 5.5 ft height has about 76.969 ft² of top and bottom, 120.951 ft² of side wall and 197.920 ft² in total.

Capsule

SA = 4πr² + 2πrh = 2πr(2r + h)

The two hemispherical ends add up to one full sphere, and the middle is an open cylinder of length h.

Spherical cap

Curved cap = 2πRh,   Base = πr²,   r² = h(2R − h)

Any two of r, R and h determine the cap. A cap 0.53 ft tall cut from a 0.8 ft-radius ball has a curved area of about 2.664 ft².

Conical frustum

Ends = π(r² + R²),   Lateral = π(r + R)√((R − r)² + h²)

With r = 0.3 ft, R = 1 ft and h = 1.5 ft, the total is about 10.185 ft².

Ellipsoid

An ellipsoid's surface area has no simple exact formula. A widely used approximation (Knud Thomsen's) is accurate to about 1%:

SA ≈ 4π((aᵖbᵖ + aᵖcᵖ + bᵖcᵖ) / 3)^(1/p),   p ≈ 1.6

With semi-axes 0.1, 0.2 and 0.35 in, the approximation gives about 0.562 in².

Square pyramid

Base = a²,   Lateral = 2a√((a/2)² + h²)

The square root is the slant height of each triangular face. A pyramid with a 3 ft base and 5 ft height has a 9 ft² base, about 31.321 ft² of sides and about 40.321 ft² in total.

Units and scaling

Surface area scales with the square of size: double every dimension and the surface grows four times while the volume grows eight times. That is why small objects lose heat faster than large ones, and why crushed ice melts faster than a block. To convert, square the length factor: 1 ft² is 144 in², and 1 m² is about 10.764 ft².

Practical tips

When estimating paint or coatings, decide whether to include the bottom, then use the base and lateral figures accordingly. Add an allowance for overlaps and waste when cutting sheet material, typically 5 to 15 percent depending on the shape.

Choosing inputs

Enter radii rather than diameters for the round shapes, and use the vertical height (not the slant height) for cones, frustums and pyramids; the calculator derives the slant height itself.

Frequently asked questions

How do I find the surface area of a cylinder?
Add the two circular ends (2πr²) to the side (2πrh): SA = 2πr(r + h).
What is the difference between lateral and total surface area?
Lateral area covers only the sides. Total surface area adds the base or bases as well.
What is the surface area of a sphere with radius 1?
4π ≈ 12.566 square units.
Is there an exact formula for an ellipsoid's surface area?
Not in elementary terms. It needs elliptic integrals, so calculators use approximations such as Knud Thomsen's formula, which is within about 1%.

Formulas and sample results on this page were checked against independent references. Page last reviewed or updated . How we verify calculators. Project led by Shaun Connell.