Serial Dilution Calculator

About this calculator

Calculate each stage of a serial dilution from stock concentration, transfer volume and diluent. Check how much remains after the next transfer.

Example: two tenfold dilutions from 100 mM stock.

Use one volume unit for all entries. Changing a unit label leaves the entered numbers unchanged.

Stock and retained-volume checks

Embed this calculator

Paste this code into a Custom HTML block on your site. The calculator fits the width of the block. Adjust the height in the code if you want more room for results.

Find this widget in the publisher directory

How to calculate a serial dilution

Each stage receives a measured transfer from the previous solution and an amount of diluent. For the first stage, the transfer comes from stock. If volumes add and the diluent has none of the tracked solute, the mixed volume is transfer plus diluent.

Stage concentration = previous concentration × transfer volume ÷ mixed volume.

Stage dilution factor = mixed volume ÷ transfer volume.

Multiply the stage factors to get the cumulative dilution factor. This is the same solute-conservation idea as the dilution equation in OpenStax Chemistry 2e. Enter all volumes in one common unit. Concentration keeps the unit selected for stock.

Two tenfold dilutions from 100 mM stock

Mix a modeled 1 mL transfer with 9 mL diluent. The first stage is 10 mL at 10 mM. Moving 1 mL onward leaves 9 mL at 10 mM in stage one. Adding that transfer to 9 mL diluent in stage two produces 10 mL at 1 mM. The cumulative factor is 10 × 10 = 100.

Mixed volume and retained volume

Mixed volume includes everything in the stage before the next transfer. Retained volume subtracts what goes to the next stage. If there is no next transfer, the retained and mixed volumes are equal. Removing a well-mixed aliquot leaves the concentration of what remains unchanged.

Turn on the stock check to compare the first transfer with the entered stock supply. Turn on the minimum retained-volume check to see which stages fall below your threshold. The worksheet rejects a transfer larger than the modeled amount in the previous stage.

When the model applies

This worksheet assumes uniform mixing, additive volumes and a diluent free of the tracked solute. It compares the values you enter. It supplies no chemical handling, clinical dosing, organism growth or experimental validation. Use a method appropriate for your material.

Frequently asked questions

How do I calculate the total serial dilution factor?
Divide each stage’s mixed volume by its transfer volume. Multiply those factors to get the cumulative factor.
How much remains in a 10 mL stage after a 1 mL transfer?
There are 9 mL left. With uniform mixing, the retained solution has the same concentration as it did before the transfer.
Can every dilution stage use different volumes?
Yes. Select Enter volumes for each stage. The worksheet checks that each transfer fits the amount available from the preceding stage.
Is 1:10 made with 1 mL stock and 10 mL diluent?
A tenfold dilution has 10 parts final volume for 1 part of transferred solution. With additive volumes, 1 mL transfer plus 9 mL diluent gives 10 mL total.

Formulas and sample results on this page were checked against independent references. Page last reviewed or updated . How we verify calculators. Project led by Shaun Connell.