Wavelength Calculator

About this calculator

Find wavelength, wave speed, frequency or period from two known wave measurements. Use the speed for your medium.

Choose hertz units for frequency or seconds units for a period.

Use scientific notation such as 3e8 if needed. Changing a unit reinterprets the entered number.

Embed this calculator

Paste this code into a Custom HTML block on your site. The calculator fits the width of the block. Adjust the height in the code if you want more room for results.

Find this widget in the publisher directory

How to calculate wavelength, wave speed or frequency

Multiply wavelength by frequency to find the phase speed of a traveling wave. Divide speed by frequency to find wavelength, or divide speed by wavelength to find frequency. Use the phase speed for the same wave and medium.

v = f × λ. Wavelength λ = v ÷ f. Frequency f = v ÷ λ.

For a wave moving at 343 m/s with a frequency of 440 Hz, the wavelength is 343 ÷ 440, about 0.77955 m. A wave with a 0.5 m wavelength and a frequency of 2 kHz has a phase speed of 0.5 × 2,000 = 1,000 m/s.

How frequency and period relate

Frequency counts cycles per second. Period is the time for one cycle. Each is the reciprocal of the other, so a 2 kHz frequency corresponds to a 0.5 ms period. In wavelength and speed mode, choose a hertz unit to enter frequency or a seconds unit to enter period.

T = 1 ÷ f. Angular frequency ω = 2πf.

Ordinary versus angular wavenumber

Ordinary wavenumber counts complete spatial cycles per meter and equals 1 ÷ wavelength in meters. Angular wavenumber measures phase change in radians per meter and equals 2π ÷ wavelength in meters. For a 0.5 m wavelength, those are 2 cycles/m and about 12.56637 rad/m.

The OpenStax mathematics of waves chapter gives the phase-wave relation and defines angular wavenumber and angular frequency. The units in the result distinguish the two spatial conventions.

Which wave speed should I enter?

Use a measured or supplied phase speed for your wave and medium. For example, a classroom exercise might specify 343 m/s for sound in air. Temperature and medium can change the speed. The speed of an envelope or pulse in a dispersive medium uses a different quantity.

Scientific notation such as 3e8 is accepted. Positive normalized inputs from 10⁻⁶⁰ through 10⁶⁰ are supported. Conversion and arithmetic occur before display rounding.

Frequently asked questions

Do hertz and seconds mean the same input?
Hertz gives cycles per second. Seconds gives time per cycle. Choose the unit for the value you know.
Can I use the tool for sound, light or radio?
Yes, when you know two quantities for the same traveling wave and use the corresponding phase speed for its medium.
Why are the two wavenumbers different?
One cycle has 2π radians. Ordinary wavenumber counts cycles per length. Angular wavenumber counts radians per length.
Does the wave speed depend on amplitude?
Amplitude is not an input to the relation used here. Use the phase speed for the wave and conditions you are modeling.

Formulas and sample results on this page were checked against independent references. Page last reviewed or updated . How we verify calculators. Project led by Shaun Connell.